Hybrid battery health certificates explained: what the check measures and what the grades mean
- CarStrike
- 7 min read
- 0 views
A plug-in diagnostic reads a hybrid’s battery controller block by block, and the result is a certificate you can show a buyer and anyone can verify. What it measures, what the A+ to F grades mean, which cars are covered, and how to book from $70 in Brisbane and on the Gold Coast.
The hybrid battery is the big question on a used Prius, Aqua, Camry or Leaf, and it’s hard to judge on a test drive. A car can feel perfectly normal while one block of its battery pack is falling behind the others. Our hybrid battery health check reads the pack directly and turns the result into a certificate you can keep, share with a buyer, or ask a seller for.
The check is done with Hybrid Pulse Pro, CarStrike’s own battery testing app. Here’s what it measures, what the certificate shows, how the grades work, and how to book one.
What the scan measures
It’s a mobile, plug-in diagnostic. A professional OBD-II adapter goes into the car’s diagnostic port and the Hybrid Pulse Pro app reads the hybrid battery controller directly. Nothing is opened or removed and no panels come off. The car stays where it is — your driveway, your workplace or the dealer’s yard.
Where the model reports it, the scan reads:
- The voltage of every battery block. Most Toyota and Lexus NiMH packs have 10 to 20 blocks; Nissan Leaf packs are read cell by cell (96 pairs). On hybrids, how evenly matched the blocks are (the spread, or ΔV) is the main health signal.
- State of health (SoH) as reported by the battery controller, on EVs and some hybrids. Where the car doesn’t report SoH, the certificate says so — we don’t guess a number.
- Internal resistance per block where the car reports it (Prius Gen 2, Alphard / Vellfire and Estima hybrids).
- Pack voltage, current, state of charge and the SOC spread.
- Battery temperatures and cooling-fan operation.
- Fault codes (DTCs) from the engine, hybrid and battery modules, including high-voltage isolation, contactor and battery codes.
- An optional road or load test that watches each block under acceleration and regenerative braking. This catches weak blocks that look fine at rest, which is why some packs need a drive before they can be graded.
The grade isn’t taken from a single snapshot. It comes from a steady reading averaged over 15 live cycles.
What the certificate shows
You receive the result as a PDF by email or text message. Page 1 is the certificate itself, designed to be shown publicly — dealers put it on their listings. It shows:
- the vehicle, VIN or chassis number, odometer reading and battery type;
- a large grade rosette (A+ to F) and a state-of-health ring;
- the key figures: block spread, pack resistance and fault codes;
- a map of the pack with every block coloured healthy, watch or fail;
- a “Tested · Certified” stamp, and a QR code with a link to a public verify page.
Page 1 carries no private customer details. A certificate for a dealer’s stock car may say “Prepared for” and the dealership’s name.
The detailed report pages that follow cover the tests performed, a voltage chart for every block against the healthy band, a resistance chart, road-test results, telemetry, fault codes, recommendations, the grading scale and method, and the disclaimer. Fault codes that were cleared before the test are always disclosed.
Each certificate has its own verify page at battery.carstrike.com.au/r/… showing the certificate and its PDF, so a buyer can check it’s genuine and unaltered. It’s CarStrike’s own test certificate — not a certification or accreditation by Toyota, Nissan or any authority — and anyone can check it at battery.carstrike.com.au.
The grades, A+ to F
- A+ Excellent — the blocks are closely matched, there are no battery faults, and the battery is performing as expected for its age.
- B Good — a minor imbalance, or a reading that couldn’t be completed. For example, a car that doesn’t report its state of health is capped at B.
- C Fair / aging — a noticeable imbalance, or battery faults cleared recently (cleared high-voltage codes cap the grade at C). Monitor it and re-test.
- D — a weak block or a high-voltage fault is present. Reconditioning or repair is recommended.
- F Critical — the battery is failing and needs replacement.
Every certificate carries the same disclaimer:
This certificate reflects the condition of the hybrid battery at the time of testing, measured with on-board diagnostic data under the load conditions described. Battery condition can change with use, temperature and time. This report does not constitute a warranty.
Which cars are covered
In short: Toyota and Lexus hybrids, Toyota plug-in hybrids and the Nissan Leaf. Ask us about other models. In more detail:
- Toyota and Lexus NiMH hybrids — Prius (Gen 2 and 3), Prius C / Aqua, Prius α, Corolla / Axio / Fielder hybrids, Camry, RAV4, Noah / Voxy, Crown, Lexus CT, ES and RX, the Alphard / Vellfire hybrid (ATH20) and the Estima hybrid (AHR20).
- Newer Toyota TNGA hybrids (C-HR, Corolla and others) — NiMH packs are read at pack level today (SOC spread, temperatures and faults); lithium-ion packs, including the Gen 5 Prius plug-in hybrid, are read cell by cell.
- Nissan Leaf, all generations — every cell, plus the battery management system’s own state of health.
If your car isn’t on that list — a Nissan e-Power, a Mitsubishi plug-in hybrid, a Honda or a full EV other than the Leaf, for example — it isn’t covered by the standard check. Ask us about other models.
What it costs and how to book
The check is from $70 with the certificate included. It’s mobile across Brisbane and the Gold Coast, and the scan is done by CarStrike HQ. Book through the form on our hybrid battery health check page.
Shopping on carstrike.com.au? Cars that already carry a certificate show it on the car’s page: the grade, the state of health, the date it was tested, page 1 of the certificate, the Verify link and an “Email me the full report” button. Hybrids without one have a “Request a battery health report” button.
Why ask for one before buying a used hybrid
A test drive tells you how a car feels on the day. It doesn’t tell you whether one block is drifting away from the rest, whether the pack is running hot, or whether battery codes were cleared shortly before you arrived. The certificate puts those things in writing: the spread across every block, the fault codes (cleared ones included), and a grade worked out by a stated method.
If you’re buying, ask the seller for a current certificate and check it on its verify page. If there isn’t one, book a check before you commit. If you’re selling, a certificate on your listing answers a buyer’s biggest question before they ask it.
Questions buyers ask
Does the battery have to come out, or the car go to a workshop?
No. It’s a plug-in diagnostic through the car’s OBD-II port. Nothing is opened or removed, and the car stays where it is — at home, at work or in the dealer’s yard.
Will every car get an exact state-of-health percentage?
No. State of health is shown when the car’s battery controller reports it, which EVs and some hybrids do. Where it isn’t reported the certificate shows n/a rather than a guess, and that car’s grade is capped at B.
Is the certificate a warranty?
No. It records the battery’s condition at the time of testing, under the conditions described in the report. Battery condition can change with use, temperature and time, and the report does not constitute a warranty or a guarantee of future battery life.
How do I know a certificate is genuine?
Scan the QR code on page 1 or follow its link. The verify page on battery.carstrike.com.au shows the certificate and its PDF, so you can check that what you’ve been shown is genuine and unaltered.











Comments (0)