Auction ended
Crossed the block on Tuesday 10 Nov 2026.

2050 Suzuki Every
Lot #8074 · Chassis DA17V
Starting bid (result not published)
≈ A$932
¥100,000 at ¥107.29 per A$1
Est. landed
~$14,463
drive-away, QLD
- Auction
- Tuesday 10 Nov 2026
- Grade
- Auction grade 3.5, Average
- Mileage
- 18,000 km
- Auction house
- JU SaitamaAssessment Pending
Grade 3.5: visible scratches, dents or wear, often higher kilometres. Read the sheet. How grades work
This 2050 Suzuki Every (chassis DA17V), graded 3.5, with 18,000 km on the clock, with a at gearbox, (660cc engine), crossed the block at JU Saitama on Tuesday 10 Nov 2026 as lot 8074. The starting bid is ¥100,000, about A$932 at today's rate of ¥107.29 per A$1; the estimate below adds shipping, duty and GST, compliance and Queensland registration. The auction has ended. CarStrike can find a similar Every at an upcoming auction and bid on it for you.
Ask about a car like this- Engine
- 660cc
- Transmission
- AT
- Colour
- N/A
- Make
- Suzuki
- Trim
- PA
Estimated landed cost
~$14,463 AUD drive-away
- Car at the typical sell price (¥457,000)
- $4,259
- Shipping & marine insurance
- $5,500
- GST (10%)
- $976
- Compliance (RAV / SEVS)
- $1,500
- Port to yard transport
- $250
- Import service fee
- $1,500
- Registration & safety certificate
- $350
- Stamp duty (3%)
- $128
Based on what a Suzuki Every typically sells for at the Japanese auctions — not the starting bid — at today's rate of ¥107.29 per A$1: the car in A$ at today's rate + shipping A$5,500 + GST 10% + A$3,600 on-road costs (compliance, transport, our fee, rego) + 3% stamp duty (Japanese-built cars are duty-free under JAEPA). An estimate, not a quote.
Try other prices in the import calculatorAuction sheet
The original Japanese inspection sheet from the auction house.

Import watchouts
- Inspect the rear subframe and exhaust hanger points for surface rust, as these areas are prone to corrosion from road grime and moisture, which can compromise structural integrity if left untreated.
- Check the CVT transmission for fluid leaks around the torque converter and monitor for shuddering during acceleration, as the CVT is sensitive to fluid degradation and can fail prematurely if not serviced regularly.
- Examine the front suspension bushings and control arm mounts for excessive wear or cracking, as the lightweight chassis can suffer from premature fatigue in these high-stress areas, leading to uneven tire wear and handling issues.
Ask about this lot
Not ready to bid? Ask our import team anything about this car.
Lot details come from the Japanese auction house and may change before the auction. Estimates are a guide only; CarStrike confirms the full costs before you bid.
